Airweave® UHT 800 is a non-woven blended, fiberglass breather. It is safer to use this breather in place of a woven fiberglass breather. Airweave® UHT 800 makes an easier transition for the vacuum bag and in any radius. One layer provides good breathing to 800°F (427°C).

Airflow 65R can be used as an autoclave or oven hose. The outer ply is silicone rubber that encases a flexible steel tube that prevents collapse and hose separation. The bell-shaped ferrule helps hose lacerations at fitting ends extending hose life. Available in straight or 90° end fittings on one or both ends.

Airdraw 2 and Wrightlon® 7400 Embossed have embossed pattern that provides network of air passageways, eliminating the need for a separate layer of breather.

Wrightlon® 4600 release film is a low cost high temperature film for use in flat or limited curvature molding applications up to 380°F (193°C). It will release from epoxy and phenolic resin systems. All standard perforations are available. Please see our perforation table in this section.

BBH 1080 is a durable high temperature and high pressure autoclave hose. The hose construction consists of an inner flexible stainless steel conduit over-wrapped with a stainless steel braid. A  stainless steel armor jacket covers the hose and protects it from the harsh autoclave and production environment.

The Masterflex “S“ series is a flexible spiral square tube used as a reinforcing hat section stiffener on the backside of the tool face. Masterflex stiffens the tool face to avoid dimensional stability problems. This is achieved by overlaying our tooling prepreg or wet lay-up plies over the Masterflex.

Stretchlon® 700 vacuum bag film is a high elongation elastomeric film which is designed for cures up to 385°F (195°C). It is particularly suitable for applications where softness and elongation are required. The risk of bridging in the corners is highly reduced due to the elasticity of the film.